Kuhnke FIO Counter-Posi2 5V-24V EtherCAT Counter Module
Product code: 69445401
The Kuhnke FIO Counter module counts binary pulses and transfers the counter values to the main controller with electrical isolation. The module has 2 counters. It can operate as an A-B-Ref or an up/down counter; it is possible to switch…
Phone: 0850 885 03 51
Datasheet, user manual and software packages if available.
Technical Specifications
| Brand | Kuhnke |
|---|---|
| Model / Product Code | 69445401 |
| Function | Counter |
| Mounting | In-panel module |
| Digital I/O (Built-in) | Input: 8 DI 1 ms, 2 incremental encoder 200 kHz / Output: 2 DO 2 A |
| Analog I/O (Built-in) | Output: 2 AO -10..+10 V 12 Bit |
| Interfaces | A, B, Ref-Z |
| Product Status | Active (from stock or to order) |
| Fieldbus Interfaces | EtherCAT |
| Connection Type | Female socket with PUSH IN spring terminal |
| Status Indicator | EtherCAT status, LEDs assigned to connection point |
| Housing Material | Aluminium frame, plastic housing |
| Dimensions (W x H x D) | 25 x 120 x 90 mm |
| Protection Class | IP 20 |
| Supply Voltage | 24 V (-15% / +20%) |
| Operating Temperature | 0 ... +55 °C |
| Immunity | Zone B according to EN 61131-2 |
| Certifications | CE, UL |
Description
The Kuhnke FIO Counter module counts binary pulses and transfers the counter values to the main controller with electrical isolation. The module has 2 counters. It can operate as an A-B-Ref or an up/down counter; it is possible to switch between single and multiple evaluation of the encoder signals.
In normal operation the digital inputs and output can be used as digital I/O, together with control and status indication via the bus. With a suitable configuration, the output can also be controlled depending on a counter. In addition, the input signals can be used to clear, start or freeze the counter values.
The Counter/Posi module also offers 2 analog outputs, which can be used to deliver a position-dependent analog value in the range -10 … +10 V DC.
Features: Store, latch and set the counter; 24 V up/down counter (32 bit); 8 x DI 1 ms, 2 x incremental encoder 200 kHz (A, B, Ref-Z); 2 x DO 2 A, 2 x AO -10 … +10 V (12 bit).
Applications
- Position and pulse counting with incremental encoder
- Up/down counter applications
- Position-dependent analog value output
- In-panel mounting